Novice Guide to Installing a New Shower Unit

Novice Guide to Installing a New Shower Unit

Blog Article

Schedule An Appointment

Just about everyone is bound to have their own unique concepts in relation to How to Install a Direct-to-Stud Shower Enclosure.

An effective shower setup needs careful preparation as well as a lot of job. For the most part, you will require to do three types of jobs: framing wall surfaces, installing the plumbing, as well as finishing wall surfaces.

Prep work

First of all, you have to select the type of shower that you want to mount. It is important to determine whether the chosen shower is capable of handling certain systems as well as can regulate a secure level of water via the central heating boiler. A lot of shower units nowadays are made to be flexible to different water pressures (such as kept warm water and also cool keys).
It is additionally important to consider the water pressure as well as the planning of the piping and water drainage for the shower

Various Kinds Of Shower Units

Push-on Mixer: The hose pipe and spray parts of the push-on mixer shower unit can be attached to the bathroom tap as per your requirement, and the water temperature level can be changed via the faucets. Push-on mixers are cheap as well as incredibly simple to mount. Nevertheless, although the hose pipe link is easy, it is conveniently removed. Additionally, it is troublesome to readjust the temperature.

Bath/Shower Mixer: The hose pipe and also spray of this kind of shower are incorporated with a bath mixer faucet, and the temperature level can be adjusted with the bath faucets. It is a really economical option as well as no added plumbing is included. Nonetheless, the bath/shower mixers also experience troublesome temperature level control choices.

Handbook Mixer: The tube and spray of a hands-on mixer shower device belong of the wall system as well as the cold and hot water materials are connected to a solitary valve The temperature level as well as pressure of the water are controlled through either one or a selection of handles (in extra costly showers). Although temperature control is much easier in hand-operated mixer types, they are more pricey than the formerly discussed mixers. They also call for added plumbing of hot and cold water supply pipelines.

Thermostatic Mixer: The hose pipe and spray of this shower kind are a part of the wall surface unit and the hot and cold water products are connected to a solitary shutoff right here also. It is complete with a built-in stabiliser to self-adjust the water temperature level as well as to stop it from becoming as well warm. Among the biggest advantages of a thermostatic mixer shower type consists of convenient temperature control. Nevertheless, it is one of the most pricey of the different mixer alternatives.

Power Shower: A power shower is a solitary unit including an effective electric pump that is capable of modifying both the water stress and also temperature. This type of shower can be fitted if there is supply of water from a cold water cistern as well as a warm water cyndrical tube. A power shower makes the adjustment of both pressure as well as temperature level easy. On the other hand, it is unsuitable for water heated up straight by the shower or where the water is provided by a mix central heating boiler under keys pressure.

Electric Shower: An electric shower is plumbed into a mains cold water supply and it heats up the water electrically. It is necessary to keep in mind that for this shower kind to be set up, the mains pressure needs to be at least 0.7 kg/sq cm (10lb/sq in). The device allows the temperature and also stress to be changed through a knob. Versions with temperature level stabilisers are better as they remain untouched by various other faucets somewhere else in use within the house. A significant drawback of electrical showers is that the control knob only permits the option of high temperatures at much less pressure, or reduced temperatures at a better pressure. This is problematic in the winter when the spray is commonly weak and the keys water is chillier. Nonetheless, this problem is dealt with in some models which are offered with a winter/summer setup.

Method

Depending upon the sort of shower you wish to mount, the shower head should either be suited order to prevent its contact with the water in the bath listed below or the base tray, or it must have a check shutoff.
Prior to beginning, it is advisable to mark the settings of the shower head as well as control, and also to plan the pipe-work included. Additionally, the water drainage system to remove the drainage will require to be intended. Both settings of the cable television path and also the shower switch will also need to be considered if an instant or electrical shower unit is being installed.
Utilize the direction guide provided with the shower device to fit the shower control.Before fitting the pipelines that will provide the water to the shower system, it is necessary to cut off the water system. In order to safeguard the pipelines, they ought to be offered a water-proof covering and also fitted with separating shutoffs. The pipes can then be buried right into the wall as well as smudged over to neaten the overall appearance.
Fit the base tray, shower head, as well as fittings.
Link the major shower control to the pipes that will be supplying the water (This might call for a female screw thread adapter).
Reconnect the water as well as test the pipelines for any leaks, as some might need tightening.
If you are installing an electric shower, bear in mind to switch off the power supply before making any kind of electrical links. Once these links have been made (there need to be advice within the user's manual), the power supply can be changed back on.

Changing Water Pressure to Match Your Shower

The cold water reservoir can be lifted to a higher elevation (sometimes as little as 150mm (6inches)) by installation a solid wooden assistance below it - possibly made up of struts and blockboards. If you pick this choice, the main and circulation pipes will certainly additionally have to be increased to satisfy the new elevation of the storage tank.
Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is picked, it must be attached right into the power supply in order to operate.

Piping as well as Water drainage

It is best to use 15mm size supply pipelines, and also make the go to the shower as short and also straight as possible so as to keep maximum pressure and also reduce heat loss. Additionally, by minimising making use of elbow joints for pipeline corners, you can decrease the resistance in the circulation of the water system. You can attain this by bending the pipes instead.

Many Usual Mistakes

Violating or overlooking regional code restrictions.

Making use of pipes that are as well little.

Affixing copper to galvanized without making use of a brass or dielectric suitable between the two.

Not using tape or pipeline compound at threaded joints.

Uneven your components when installing them.

Not installing an air void filling up for components.

Cutting supply stub outs also short to mount the shutoff valves onto after the finished wall surface remains in location.

Not correctly lining up tubing right into fittings or quit shutoffs. (Requiring the nut onto the compression ring at an angle when the tubing is at an angle will certainly create a leak.).

When turning the water back on in your house, always run the outdoors pipe valve or purge your toilets to bleed dirt and air from the lines. This debris can trigger troubles in your sink taps as well as other plumbing trim.

How Do You Install a Shower? Follow This Guide

Installing a Shower at a Glance

Tools & Materials: Level, electric drill, caulk, hole saw, cedar shims, shower unit

Step 1: Drill pilot holes

Step 2: Prep fixture holes

Step 3: Move unit into place

Step 4: Caulk corners and base

Step 5: Attach door

Step 6: Install shower pan

Whenever plumbing is involved in a DIY project, people worry about what might go wrong. The truth is that installing a shower isn’t that complicated, and you can save a lot of money by doing it yourself. You shouldn’t need to make any alterations to your plumbing to complete the job, and most of the tools you need will be provided in your new shower kit.

Can I Install a Shower Myself?

Even if you’ve never installed a shower before, you’ll find this to be a project that is perfectly suited for DIYers with a moderate level of experience. Whether you're doing a bathtub conversion or installing a new stall, most of what you need comes in shower kits that you can purchase from a hardware store. The first thing you need to do is determine what type of shower stall you want.

Single-panel stalls are the easiest to install because they come preassembled. All you need to do is put them in place. Multi-panel showers require a few additional steps, but you’ve got more control over the appearance of your unit. Multi-panel units are also much easier to handle if you’re going to do the installation without any help.

Be sure to take all appropriate safety precautions, such as wearing eye protection and gloves. When you’re removing or installing a shower unit, you might kick up debris that could hurt your eyes. You’ll also need to work with equipment that will get extremely hot, so be sure to have safety gloves handy.

Tools and Materials

2- to 4-foot level

Electric drill with a 1/8-inch drill bit

Caulk

2-inch hole saw

Cedar shims

The unit itself

Before You Begin: Prep the Space

It’s highly important to measure your space accurately before putting the stall in. Measuring from the floor upward and from each corner outward will ensure you’ve got the right measurements. What you’re looking for is where the plumbing apparatuses are going to come through the stall. Transfer these measurements over to the back of your unit by drawing the locations of these holes using a pencil or marker.

Pull out your old shower and make sure to scrape off all the old caulking. Be thorough because you want to work with smooth surfaces for the best installation. Once you’ve pulled out your existing shower, you need to make sure that the floor is clean and dry. The best way to clean debris is with a shop vacuum, as it’ll soak up water and dirt together.

If you’re experiencing any plumbing issues, such as low water pressure, this is a perfect opportunity to solve them. Make sure that the pipes themselves are not in need of patching and clean your showerhead. When you turn the water back on after your project, check the pipes for signs of wear or disrepair. Anything beyond minor repairs should be handled by a plumber, and this is the best time to bring in a professional.

If the floor has any moisture at all, don’t proceed until it’s completely dry. The last thing you need is for the floor to rot or invite mold and mildew into your base. Once everything is dry, apply waterproof wallboard to the walls. This can be attached with screws or nails, then sealed with caulk so that water doesn’t seep into any crevices.

https://www.homeserve.com/en-us/blog/how-to/install-shower/

I have been very serious about How to Install a Direct-to-Stud Shower Enclosure and I really hope you enjoyed the entire article. Appreciated our piece? Please share it. Let someone else check it out. Thank-you for your time spent reading it.

Get Quote

Report this page